REMOTE MONITORING & CONTROL APPLIANCES
iCE's core strength is its ability to provide multiple options and solutions for remote monitoring and control of remote sites where skilled personnel are not readily available.
Through a combination of our own appliances and our global technology partners, iCE can offer a monitoring appliance to suite any requirement.
Our Solutions
i-Sky Series
Commercial and Industrial LoRaWAN Solutions
interSeptor Series
Simple, Accurate and Reliable
Plug-n-Play
Falcon Series
Advanced, Programmable
Facility Management
ControlByWeb Series
Modular, Compact
and Durable
MultiCom Series
Industrial IoT Gateways
MultiPro Series
Convert almost any industrial protocol to SNMP
Common Environmental Monitoring Sensors Include: (but not limited to)
Temperature, Humidity, Air Quality, Occupancy, Liquid Levels, Leak (Water/Oil/Acids), Smoke, Door (open/closed), Motion, Air-flow, Power (on/off) etc.
Advanced Facility Monitoring Sensors and Controllers Include: (but not limited to)
Voltage, Current, kWh, Water Flow, Water Temp, Solenoid Valves, Relays, Pressure, Air-flow, Fuel Levels
interSeptor Series...
Web-based, Plug-n-Play technology that is user-friendly, accurate and robust.
interSeptor Pro is an advanced ethernet Data Centre and Rack Monitoring System that monitors room and rack environmental conditions and provides early warning alerts in the event of air-conditioning failure and other conditions that may threaten business continuity.
In addition, interSeptor Pro can also be used to extensively record temperature/humidity data for graphing and analysis helping you not only to ensure your IT equipment is running under optimal conditions but also to quickly identify where air-conditioning systems could be run more efficiently to maximise energy savings
-
Supports from 2 to 24 x Temperature/Humidity Sensors
-
Supports from 4 to 48 x Go-Probe Alarm Sensors
-
Optional GSM modem for SMS alerts (Pro Series Only)
-
Email, SNMP alerts
-
Web browser interface for remote monitoring
-
Monitoring also possible using an SNMP-based Network Management System & Telnet
-
Up to 6 Relay Outputs for automated, on-site, crisis management
-
On-board logging (network independent)
-
On-board graphing facility
-
User-configurable alarm thresholds
-
Range of optional sensors available
-
Cat5 cabling to Temperature/Humidity probes for maximum user flexibility
Web Interface View (Java Animations)
Downloads - Data Sheets
Temperature/Humidity Sensor
with dual DI ports
Falcon Series...
Advanced Monitoring and Leak-Detection Appliances
The Falcon series of Facilities Monitoring Systems (FMS) is a comprehensive monitoring solution commonly used to monitor sensitive facilities, critical equipment status and temperature, and environmental sensors. Feature-rich and budget friendly, the FMS is used in data centers, labs, telecommunications facilities, museums, and many other facility environments.
The FMS stores and displays all its own data and hosts its own web pages; you won’t need to buy additional servers or install software on your PC. Great onboard features include data trending and extended logging, interactive graphical facility mapping, PUE/DCiE monitoring, and nesting, which allows one FMS to report conditions from a large collection of related FMS units.
The FMS is engineered without any internal moving parts – no hard drive, no fans. This means no downtime, no lost data, and no scheduled maintenance.
Designed to be vendor neutral, the FMS aggregates information from a wide variety of sensors and equipment and then displays it through an onboard web interface. Does your facility have a larger BMS? No problem – the FMS also allows aggregated data to be pulled to other systems, all without additional servers or software.
Key Features
-
Stand-alone, Web-enabled appliance hosts its own web pages
-
Provides one integrated view of all facility equipment
-
Use a web browser to configure the system and view data
-
Stores and displays its own data – no additional servers or software required
-
No recurring fees or setup fees
-
No internal moving parts, like hard drives or fans
-
No downtime, no lost data
-
Third-party sensor friendly
-
Vendor neutral
-
Highly scalable
-
Accommodates digital, analog, Modbus, and SNMP inputs
-
Provides Modbus, BACnet, and SNMP output
-
Multiple notification paths – SNMP traps, email, SMS/PDA
-
Support for SNMP V1, V2, and (optional) V3
Downloads - Data Sheets
ControlByWeb Series...
Modular, Web-Enabled Drop-In Solutions for Remote Monitoring & Control
All ControlByWeb™ products have built-in web servers and can be setup, monitored, and controlled using a web browser. In addition, our products can be monitored and controlled using custom computer applications as well as our CBW Mobile app for smart phones and tablets.
Options in this series include various inputs and outputs such as relays, digital inputs, analog inputs, 1-Wire bus for monitoring temperature & humidity, that can be used to remote control/monitor local and remote devices. This series of I/O products support alert notifications, scheduling, logging, BASIC interpreter, communication with a variety of protocols (Modbus, SMNP, SMTP, etc.), and many more features.
From stand alone applications to Industrial IoT, Smart Buildings, Campus and Cities you will find a module to exceed your requirements. Flexibility, and unlimited expansion options offer high versatility and ultimate future-proofing.
For more information, click here...
iCE MultiCom Series...
Advanced, compact multi-communication supported gateways with multiple I/O options for the industrial IoT market
Key Features
Now in its 4th generation, the iCE MultiCom‐IV supports multiple communication technologies, offering various options for alerting,
configuring and monitoring of remote sensors and devices. In doing so, the MultiCom‐IV provides out-of-band redundancy options to further ensure critical environments and equipment remain in and at their optimized state.
-
Multiple Communication Options – greater redundancy
-
Supports Ethernet, GSM, Modbus (485/232)
-
Large sensor capacity (Registers, AI, DI, DO, Pulse etc – expansion options available)
-
Extremely compact - Does not take up rack U space
-
Internal Battery Backup option
-
Reliable Double Watchdog Feature
-
Vibration Resistant
-
Low Power Usage
-
SMS Alerts and Control
-
Expansion Modules Supported (RS485)
Downloads - Data Sheets
iCE MultiPro Series...
Monitor all your industrial devices and protocols over SNMP
The iCE MultiPro, protocol converter can convert almost any industrial and proprietary protocol to the
more common IT based, SNMP protocol. This is essential where central monitoring of multiple devices of
multiple brands are found in a single site or location.
The iCE MultiPro collects data from the field device using its default protocol. It then provides access to this
data with a SNMP proxy interface. The SNMP client can then manage and monitor the data through iCE365, iCE-NEO or any other SNMP based central monitoring platform.
Key Features
-
Multiple Protocols Supported
-
SNMP Output
-
Supports up to 128 devices (1024 Registers)
-
Web-Interface (Setup/View)
-
Non-Proprietary (All Brands Supported)
-
Internal Watchdog Function
-
PC Simulation Tool
-
Low Power
-
Industrial Grade
-
-20～70℃ Working Temperature
-
20~90% (No Condensation) Working Humidity
-
Galvanized Steel Chassis
-
Downloads - Data Sheets
iCE i-Sky-II LoRaWAN Series...
Commecial and Industrial Grade IoT Solutions over LoRaWAN/GSM/WiFi/Ethernet
The iCE i‐Sky‐II is a true industrial IoT solution offering a combination of wireless flexibility and self‐powered
industrial sensors to suite any application. Low‐power sensors communicate to central gateways using an industry standard, low frequency LoRaWAN protocol. Data is then made available through the iCE‐NEO cloud
platform where its can be viewed in real‐time and logged for historical analysis. Thresholds can be added to
trigger events and alerts can be generated and sent to relevant parties.
iCE iG67 is a robust 8‐channel outdoor LoRaWAN® gateway. Adopting SX1302
LoRa chip and high‐performance quad‐core CPU, iG67 supports connections
of more than 2000 nodes and has line of sight comms of up to 15km
and an IP67 waterproof case, which is ideally suited to smart cities, agriculture, mines smart metering and many other outdoor applications. Multiple back‐haul redundancy makes it ideal for reliable real‐time monitoring and management.
The iG65 model is suited towards indoor/outdoor environments with a focus on commercial applications such as data-centres, pharmaceutical, cold storage, schools, food processing plants etc.
